OPERATOR’S STATION
SEAT
35. Put spacers (52) and seat cushion assembly (51)
in position in the bracket assemblies.
36.
37.
Install the bolts that hold the cushion assem-
bly. Tighten the bolts to a torque of 27 N•m (20
lb. ft.), then turn the bolts ¼ turn counter-
clockwise.
Install plate assemblies (54) on the back cushion
assembly. Install the screws and locknuts that
hold the plate assemblies but do not tighten.
38. Install springs (53) on the plate assemblies.
39.
Install back cushion assembly (55) and plate as-
semblies on the bracket assemblies. Install the
bolts in the plate assemblies and tighten the
screws.
40. Put back cushion assembly in the “UP” posi-
tion. Connect springs (53) to bar (45).
end by:
a) install seat
TM 5-3805-258-24-2
DISASSEMBLY AND ASSEMBLY
5-489
