TM 5-3805-262-20
4-2. FUEL SYSTEM MAINTENANCE (CONT)
g. C o l d S t a r t K i t ( c o n t ) .
REMOVAL
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
Loosen bail (2) lock nut and
remove cylinder (l).
Remove bail (2) and two ex-
tension links (3) by gently
striking bottom of bail using
palm of your hand then pulling
extension links apart to dis-
engage slots from ears of
solenoid (16).
Remove and discard gasket (4)
from solenoid (16).
Loosen two compression nuts (5)
at engine intake manifold and
solenoid (16); disconnect tube
(7) and remove from loader with
compression nuts (5) and com-
pression sleeves (6) attached.
At engine intake manifold,
remove nozzle (8).
Remove fitting (9) from
solenoid (16).
Grasp connector (10) between
two fingers and disconnect from
solenoid (16) by pulling up on
connector.
Support solenoid (16) and re-
move two capscrews (11), nuts
(12), lock washers (13),
terminal (14), and spacers
(15). Remove solenoid (16) from
l o a d e r .
4-50
