(2)
(3)
(4)
(5)
(6)
TM 5-3805-262-20
Start engine and raise bucket off ground, using LIFT ARM control lever in
RAISE position, just enough to enable removal of transport bracket. Re-
turn LIFT ARM control lever to NEUT. position.
Remove capscrew and nut then remove transport bracket from lift cylinder
asssembly rod. Store transport bracket in cab tool box.
Using BUCKET control lever in DUMP position, position bucket until it is
level with ground as indicated by bucket level indicator. Bucket is level
with ground when tube and rod ends are even. Return BUCKET control lever
to NEUT. position.
Lower bucket to ground using LIFT ARM control lever. Return lever to
NEUT. position.
Turn off engine and store transport bracket and its attaching hardware in
tool box behind operator’s seat.
2-23
