TM 5-3805-262-20
Transporting the MW24C Loader Scoop ROPS
To comply with height limitations and to minimuze possible damage to the ROPS cab it can be removed
from the Loader and transported separately on a custom built pallet. The cab is secured to the pallet by
1/2" carriage bolts.
With the cab set in place on the pallet, drill (2) (4 optional) clearance holes through the 4 x 6 side
members in line with the existing mounting holes in the floor of the cab. The cab may be further secured
by the use of nylon holding straps placed as required.
A customized pallet may be constructed as suggested by the following sketch:
2-24
