TM 5-3805-262-34
4-3. TRANSMISSION MAINTENANCE (CONT)
i. Control Valve (Cont).
CLEANING
Dry cleaning solvent P-D-680 used to clean
Wear protective goggles and gloves and
parts is toxic and flammable.
use only in a well ventilated
area. Avoid contact with skin, eyes and clothes and don’t breathe
vapors. Do not use near open flame or excessive heat and don’t smoke
when using it. Failure to do so could cause serious injury. If you be-
come dizzy while using cleaning solvent, get fresh air and medical
attention immediately. If contact with skin or clothes is made, flush
with large amounts of water.
If contact with eyes is made, wash eyes
with water and get medical aid immediately.
Compressed air used for cleaning purposes will not exceed 30 psi. Use
only with effective chip guarding and personal protective equipment
(goggles/shield, gloves, etc). Failure to do so could cause serious
injury to eyes and possible blindness.
If you hurt your eyes or if a
foreign object is blown into your eyes, seek medical attention
immediately.
(1) Clean body (29) using cleaning solvent P-D-680. Clean oil passages using
fine wire to remove obstructions. Dry using compressed air. Use com-
pressed air to clear debris
(2) Clean remaining parts using
pressed air.
(3) Use compressed air to clear
from oil passages.
cleaning solvent P-D-680. Dry using com-
debris from passage in regulator valve (3).
4-208
