TM 5-3805-262-343-1. ENGINE MAINTENANCE (CONT) g.FlywheelHousing(Cont).INSTALLATION(1)Install plug (11), if removed.When using chain hoist to remove or install parts, be sure chain hoistis securely fastened to the part and that all slack in chain is takenup. Failure to do so could cause serious injury due to the part fallingon you.If you are injured by falling equipment, obtain medical aidimmediately.(2)Using chain hoist, position flywheel housing (10) on cylinder block.(3)Install two socket head capscrews (7), lock washers (9), and nuts (8).(4)Install capscrew (6), lock washer (5), and nut (4).(5)Install capscrew (l), three capscrews (2), capscrews (3), seven lockwashers (5), and two nuts (4).(6)Install engine in loader (page 3-30).(7)Install starter on engine (refer to TM 5-3805-262-20).LEGEND1.2.3.405.6.7.8.9.10.11.CapscrewCapscrews (3)Capscrews (3)Nuts (3)Lock washers (8)CapscrewSocket head capscrews (2)Nuts (2)Lock washers (2)Flywheel housingPlug3-56
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business