TM 5-3805-262-34
13-1. ENGINE MAINTENANCE (CONT)
g.
Flywheel Housing.
This task covers removal, cleaning, inspection, and instal-
lation of the flywheel housing.
TOOLS: No. 1 Common Organizational Maintenance Tool Kit
Safety glasses
Key set, socket head screw
Socket wrench set, 3/8 inch drive
Putty knife
Chain hoist
MATERIALS/PARTS: Clean cloths (Appendix C, item 1)
Cleaning solvent P-D-680 (Appendix C, item 2)
REFERENCE: TM 5-3805-262-20
NOTE
PRELIMINARY PROCEDURE: Starter removed from engine (refer to TM 5-
3805-262-20) and engine removed from loader (page 3-26).
LEGEND
1. Capscrew
2. Capscrews (3)
3. Capscrews (3)
4. Nuts (3)
5. Lock washers (8)
6. Capscrew
7. Socket head capscrews (2)
8. Nuts (2)
9. Lock washers (2)
10. Flywheel housing
11. Plug
REMOVAL (SHEET 1 OF 2)
When using chain hoist to remove or install parts, be sure chain hoist
is securely fastened to the part and that all slack in chain is taken
up. Failure to do so could cause serious injury due to the part falling
on you. If you are injured by falling equipment, obtain medical aid
immediately.
(1)
Attach chain hoist to flywheel housing (10) and take up slack.
3-54
