TM 5-3805-262-34
3-6. WIRING HARNESSES MAINTENANCE (CONT)
b. Rear Wiring Harness (Cont).
INSTALLATION (SHEET 7 OF 8)
(37)
(38)
(39)
(40)
(41)
(42)
(43)
(44)
(45)
(46)
(47)
Route rear wiring harness branch containing nine wires up to left stop
and tail light, flood light, and backup alarm.
Remove hardware securing two clamps located on left and right sides of
radiator guard. These clamps secure blackout lights wiring harness. In-
stall rear wiring harness in these clamps and reinstall clamps.
Connect rear wiring harness black-red wire terminal to backup alarm ter-
minal. This is the only wire connected to back-up alarm terminal. Other
backup alarm terminal will have jumper wire connected between it and
backup alarm mounting hardware.
Connect rear wiring harness two blue wires terminated in one bullet ter-
minal to left flood light. Do this by grasping both in your fingers,
alining, and firmly pushing together.
Connect rear wiring harness two black wires terminated in one bullet
terminal to left stop and tail light black wire terminal. Do this by
grasping both in your fingers, alining, and firmly pushing together.
Connect rear wiring harness two tan wires terminated in one bullet
terminal to left stop and tail light green wire terminal. Do this by
grasping both in your fingers, alining, and firmly pushing together.
Connect rear wiring harness two pink wires terminated in one bullet
terminal to left stop and tail light red wire terminal. Do this by
grasping both in your fingers, alining, and firmly pushing together.
Connect rear wiring harness blue wire terminal to right flood light. Do
this by grasping both in your fingers, alining, and firmly pushing to-
ge ther.
Connect rear wiring harness pink wire terminal to right stop and tail
light red wire terminal. Do this by grasping both in your fingers,
alining, and firmly pushing together.
Connect rear wiring harness tan wire terminal to right stop and tail
light green wire terminal. Do this by grasping both in your fingers,
alining, and firmly pushing together.
Connect rear wiring harness black wire terminal to right stop and tail
light black wire terminal. Do this by grasping both in your fingers,
alining, and firmly pushing together.
3-282
