INSTALLATION (SHEET 8 OF 8)

b. Rear Wiring Harness (Cont) - TM-5-3805-262-34_437

TM-5-3805-262-34 Loader Scoop Type DED 4x4 Articulated Frame Steer 2-1/2 Cubic Yard (J.I. Case Model MW24C) Manual
Page Navigation
423

TM 5-3805-262-34 3-6. WIRING HARNESSES MAINTENANCE (CONT) b. Rear Wiring Harness (Cont) . INSTALLATION (SHEET 8 OF 8) (48) Connect front wiring harness connector to rear wiring harness connector. Do this by alining groove in front wiring harness con- nector with tab in rear wiring harness con- nector, pushing firmly, and turning nut clockwise. (49) Install tie straps as necessary to secure rear wiring harness to blackout lights wir- ing harness. (50) Spray all exposed terminals with electrical sealer. (51) Tell assistant to check all rear wiring harness connections using following table and wiring diagram in TM 5-3805-262-20. (52) Connect battery ground cable (refer to TM 5-3805-262-20). (53) Turn ignition key switch to on position and test rear wiring harness (refer to TM 5- 3805-262-20). 3-284

Privacy Statement
Press Release
Contact