TM 5-3805-262-34
REMOVAL (SHEET 2 OF 2)
LEGEND
1. Nuts (14)
2. Washers (14)
3. Differential assembly
(4)
(5)
(6)
(7)
Position roller jack under dif-
ferential assembly (3) as
shown.
Remove two nuts (1) and washers
(2).
Use small pry bar with rounded
end to straighten differential
assembly (3) in housing bowl
and to remove from axle hous-
ing.
Remove differential assembly
(3) from beneath front chassis.
If necessary, use chain hoist
to raise front chassis just
enough to enable moving roller
jack from beneath front
chassis.
3-363
