TM 5-3805-262-34
3-9. FRONT AND REAR AXLES MAINTENANCE (CONT)
f. Rear Axle Planetary Assemblies.
This task covers removal, disassembly, clean-
ing, inspection, repair, reassembly, and installation of rear axle planetary assem-
blies.
TOOLS: No. 1 Common Organizational Maintenance Tool Kit
Scratch wire brush
Retaining ring pliers
Hand hammer, 16 ounces
Safety glasses
Key set, socket head screw
Indicating dial scale, zero to 50 pounds
Mechanical puller set
Automotive Mechanic’s Tool Kit
Socket wrench set, 1/2 inch drive
Drive pin punch, 1/4 inch point
Drive pin punch, 3/4 inch point
Pry bars, two
No. 2 Common Organizational Maintenance Tool Kit
Torque wrench, 3/4 inch drive
Socket wrench adapter, 1/2 inch male to 3/4 inch female
Chain hoist equipped with nylon straps
Cord
Jack stands
Micrometer
Rod, 1-3/4 inches diameter
Sleeve, 4-1/4 inches diameter
Sleeve, 6-1/2 inches diameter
Wheel bearing nut tool, 4-3/8 inches (FSCM 45225 PN CAS-1036)
Wood block
Hydraulic press
MATERIALS/PARTS: Clean cloths (Appendix C, item 1)
Cleaning solvent P-D-680 (Appendix C, item 2)
Grease (Appendix C, item 7)
Hypoid gear oil (Appendix C, item 13)
Paint (Appendix C, item 22)
Retaining compound (Appendix C, item 31)
Air-drying adhesive (Appendix C, item 34)
Oil seals (FSCM 78500 PN A1205S1631)
O-rings (FSCM 78500 PN 3780T384)
Thrust washers (FSCM 78500 PN 1229V3116)
REFERENCES: TM 5-3805-262-10
TM 5-3805-262-20
LO 5-3805-262-12
NOTE
PRELIMINARY PROCEDURE: Rear wheels removed and oil drained from rear
axle planetary assemblies (refer to TM 5-3805-262-20).
3-393
