TM 5-3805-262-34
DISASSEMBLY (SHEET 1 OF 2)
(1)
(2)
(3)
(4)
Measure length yoke (1) is turned onto
shaft of piston (5). Record measurement
to aid reassembly.
Hold yoke (1) from
nut (2).
turning and loosen
Remove yoke (1) and nut (2) from shaft
of piston (5).
Apply silicone lubricant to shaft of
piston (5).
LEGEND
1. Yoke
2. Nut
3. Spring
4. Mounting plate
5. Piston
6. Cylinder
7. Capscrews (8)
8. Warning plate
9. O-ring
10. Wiper
(5)
Install chamber tool as shown using 5/8 inch inside diameter washer and
3/4 NC nut. Tighten nut securely.
(6) Using paint or other suitable marker, put match marks on mounting plate
(4) and cylinder (6).
3-415
