TM 5-3805-290-10
HIGHWAY TRANSPORT - CONTINUED
0022 00
INTRODUCTION - CONTINUED
WARN I N G
Stand clear of frame articulation area when machine is operating. There is no clearance for personnel in
this area when machine turns. Crushing could occur, resulting in injury or death to personnel.
6.
Throughout procedure, be aware of potential hazards from frame articulation area. Stand clear of frame articulation area
when machine is operating.
WAR N I N G
BE ALERT for personnel in the area while operating machine. Always check to ensure area is clear of
personnel and obstructions before moving. Failure to follow this warning may result in injury or
death to personnel or damage to equipment.
7.
Ground guide assistance is MANDATORY when driving machine on or off trailer.
00022 00
CONFIGURE MACHINE FOR HIGHWAY TRANSPORT
LOADING MACHINE ON TRAILER
00022 00
1.
Chock wheels of trailer.
WARN I N G
Stand clear of frame articulation area when machine is operating. There is no clearance for per-
sonnel in this area when machine turns. Crushing could occur, resulting in injury or death to per-
sonnel.
Backup alarm does not work with ROPS/FOPS removed.
2.
3.
Raise loader arm as required so that loader arm and work tool will clear crest of trailer ramp (WP 0004 00).
WAR N I N G
Always use a ground guide when operating machine up ramp to load on trailer. Failure to use a
ground guide may cause injury or death to personnel or damage to equipment.
When operating machine without ROPS/FOPS, drive with extreme caution, at low idle, and in 1st
gear reverse ONLY. Machine has no rollover/falling object protection without ROPS/FOPS. Fail-
ure to follow this warning may cause injury or death to personnel or damage to equipment.
Using ground guide assistance and in 1st gear ONLY, back machine onto trailer bed SLOWLY.
4.
5.
Once machine is correctly positioned on trailer bed, lower loader arm (WP 0004 00). Rest work tool on blocking.
6.
Place transmission in N (NEUTRAL) and engage parking brake (WP 0004 00).
7.
0022 00-2