TM 5-3805-290-23-1
TROUBLESHOOTING WITH A DIAGNOSTIC CODE - CONTINUED
0009 00
Table 2. Machine Control System - Continued.
(MID 081)
TEST OR INSPECTION
CORRECTIVE ACTION
CID FMI CODE
0473 04
427-B1862
N OT E
This test procedure may create other diagnostic codes. Ignore these created diag-
nostic codes and clear diagnostic codes when original diagnostic code has been
corrected. Ensure diagnostic code CID 0473 FMI 04 is active before performing
this procedure.
1. Check sensor.
1. If diagnostic code remains active, go to
(a) Turn battery disconnect switch and
Test 2.
engine start switch to ON position (TM 2. If diagnostic code is no longer active,
replace brake charging pressure sensor
(b) Connect MSD (WP 0006 00) and
(WP 0071 00).
ensure diagnostic code is active.
(c) Observe status of diagnostic code.
Disconnect brake charging pressure
sensor from wiring harness (WP 0071
00).