TM 5-3805-290-23-2
PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS)
INCLUDING LUBRICATION INSTRUCTIONS - CONTINUED
0020 00
Table 1. Unit Preventive Maintenance Checks and Services (PMCS) for the 924G Wheel Loader - Continued.
LOCATION
ITEM TO
CHECK/
ITEM
MAN-
NOT FULLY MISSION
SERVICE
NO.
INTERVAL HOURS
PROCEDURE
CAPABLE IF:
AC Refriger- Notify Direct Support Maintenance to
14
2,000 Hours
ant Accumu- replace AC refrigerant accumulator (with
desiccant) (WP 0193 00).
lator (With
Desiccant)
Service Brake Perform service brake disc wear check
15
2,000 Hours
Discs - Front (WP 0015 00).
or Annual
and Rear
Axles
Change differential and final drive oil
16
2,000 Hours
1.0
Differential
or Annual
Hour
and Final
Drive - Front
and Rear
Axles
Change hydraulic system oil and replace
17
2,000 Hours
1.0
Hydraulic
hydraulic system filter (WP 0137 00).
System
or Annual
Hour
Replace hydraulic tank breather (WP
N OT E
18
2,000 Hours
1.0
Cooling
System
or Annual
Hour
Cooling system is provided with ELC (pink colored) coolant from
the factory. However, green coolant may be used to top off.
At first annual service, drain ELC and replace with A-A-52624
coolant (WP 0042 00).
A freeze protection indication other than -50F (-47C) requires
corrective action. Partially drain coolant and replace with water or
antifreeze to bring freeze protection to -50F (-47C).
Do not test strip at temperatures below 50F (10C) or above
85F (30C).
a. Use test strip to check for proper
freeze point and nitrite level. If levels
are out of specification, drain and
refill cooling system (WP 0042 00).
b. Test for reserve corrosion protection
using test strip.
0020 00-9