TM 5-3805-290-23-2
CHANGING ENGINE OIL AND OIL FILTER REPLACEMENT - CONTINUED
0025 00
REMOVAL
1.
Remove plug (1) from bottom of drain hose (2).
WARN I N G
Lubricating/hydraulic oils used in the performance of maintenance can be very slippery. Immediately wipe up
any spills. Failure to follow this warning may result in injury to personnel.
When servicing this machine, performing maintenance, or disposing of materials such as engine coolant,
hydraulic fluid, lubricants, battery acids or batteries, and CARC paint, consult your unit/local hazardous
waste disposal center or safety office for local regulatory guidance. If further information is needed, please
contact The Army Environmental Hotline at 1-800-872-3845.
To prevent injury to personnel, wear protective eye covering and gloves.
N OT E
Crankcase has oil capacity of 4.2 gal. (16 L).
2.
Open drain cock (3) and drain oil into container.
3.
Close drain cock (3).
4.
Install plug (1) into bottom of drain hose (2).
427-B0046
0025 00-2