TM 5-3805-290-23-2
COOLANT TEMPERATURE SENSOR REPLACEMENT - CONTINUED
0063 00
REMOVAL
1.
Disconnect wiring harness (1) from coolant temperature sensor (2) mounted to cylinder head (3).
2.
Remove coolant temperature sensor (2) and O-ring (4) from cylinder head (3). Discard O-ring.
427-B0099
INSTALLATION
1.
Lubricate new O-ring (4) with thin coat of clean coolant, install O-ring on coolant temperature sensor (2), and install
assembly in cylinder head (3). Tighten sensor to 15 lb-ft (20 Nm).
2.
Connect wiring harness (1) to coolant temperature sensor (2).
3.
Fill cooling system to correct level (WP 0042 00).
4.
Run engine until normal operating temperature is reached (TM 5-3805-290-10).
5.
Shut down engine (TM 5-3805-290-10).
6.
Check for cooling system leaks.
END OF WORK PACKAGE
0063 00-2
