TM 5-3805-290-23-2
STEERING WHEEL REPLACEMENT - CONTINUED
0098 00
REMOVAL - CONTINUED
2.
Disconnect wire (3) from horn button (1).
CAU T I ON
Be careful not to cut wire with socket.
3.
Loosen nut (4) on steering shaft (5) until top of steering shaft is flush with nut.
4.
Use a socket smaller than nut (4) as a spacer and coil wire (3) up inside socket.
5.
Using puller cross bar, push bolt and 8 mm bolts. Rest socket on nut (4) and puller on socket.
6.
Install two puller bolts and tighten evenly. Remove steering wheel (2) from seat.
7.
Remove tooling and nut (4) from steering wheel (2).
8.
Remove cover (6), bolt (7), and knob (8) from steering wheel (2).
427-B0202
427-B2037
0098 00-2