TM 5-3805-290-23-2
TILT CYLINDER REPLACEMENT - CONTINUED
0128 00
REMOVAL - CONTINUED
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure any lifting equipment used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting equipment. Failure to follow this warning may result in injury or
death to personnel.
N OT E
Tilt cylinder weighs 150 lb (68 kg).
13.
With assistance, remove bolt (18) and washer (19)
from pin assembly (3).
N OT E
Use hydraulic pumping unit and attach-
ments to remove pin assembly.
14.
Remove pin assembly (3) from machine.
427-B0250
N OT E
Use inserter/remover, nut, hand-driven
hydraulic ram, and plain stud to remove
pin assembly.
15.
With assistance, remove bolt (20) and washer (21)
from pin assembly (22).
16.
Remove pin assembly (22) and tilt cylinder (8) from
machine.
427-B0251
0128 00-4
