TM 5-3805-290-23-2
TILT CYLINDER REPLACEMENT - CONTINUED
0128 00
REMOVAL
1.
Remove bolt (1) and washer (2) from pin assembly (3).
2.
Position kickout assembly (4) aside (WP 0057 00).
3.
Remove four bolts (5), washers (6), and flange (7)
from tilt cylinder (8).
4.
Disconnect hose assembly (9) from tilt cylinder (8).
5.
Remove O-ring (10) from hose assembly (9). Discard
O-ring.
6.
Remove bolt (11) and washer (12) from tilt cylinder
(8).
7.
Remove clamp (13) from hose assembly (14).
8.
Disconnect hose assembly (14) from fitting (15) and
position hose assembly aside.
9.
Remove O-ring (16) from hose assembly (14). Discard
O-ring.
10.
Remove fitting (15) from tilt cylinder (8).
11.
Remove O-ring (17) from fitting (15). Discard O-ring.
12.
Attach lifting equipment to tilt cylinder (8).
427-B0219
0128 00-3