TM 5-3805-290-23-2
LIFT CYLINDERS REPLACEMENT - CONTINUED
0129 00
INSTALLATION - CONTINUED
N OT E
Apply a thin coat of clean oil to all O-rings
before installation.
6.
Install new O-ring (11) on hose (4).
7.
Install hose (4), two flange halves (10), four washers
(9), and bolts (8) on lift cylinder (1).
427-B1948
8.
Install new O-ring (7) on connector (5).
9.
Install connector (5) on lift cylinder (1).
10.
Install new O-ring (6) on hose (4).
11.
Connect hose (4) to connector (5).
12.
Install support (3) on hose.
13.
Install clamp (2) on lift cylinder (1).
427-B1947
14.
Repeat installation steps for lift cylinder on opposite side of machine.
15.
Remove blocking from lift cylinder (1).
16.
Lower bucket (TM 5-3805-290-10).
17.
Run engine and verify correct operation of lift cylinders (TM 5-3805-290-10).
18.
Shut down engine (TM 5-3805-290-10).
19.
Check for hydraulic leaks.
END OF WORK PACKAGE
0129 00-7/(0129 00-8 Blank)