TM 5-3805-290-23-2
TURBOCHARGER AND OIL LINES REPLACEMENT - CONTINUED
0165 00
REMOVAL - CONTINUED
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during
procedure. Failure to follow this warning may result in injury to personnel.
N OT E
Turbocharger weighs 49 lb (22 kg).
10.
Remove four nuts (13) from turbocharger (3). Discard
nuts.
11.
With assistance, remove turbocharger (3) and gasket
(14) from engine. Discard gasket.
427-B0093
CLEANING
WARN I N G
Solvent cleaning compound MIL-PRF-680 Type III is an environmentally compliant and low-toxic
material. However, it may be irritating to the eyes and skin. Use protective gloves and goggles. Use in
well-ventilated areas. Keep away from open flames and other sources of ignition. Failure to do so may
result in injury or death to personnel.
Particles blown by compressed air are hazardous. DO NOT exceed 15 psi (103 kPa) nozzle pressure
when drying parts with compressed air. DO NOT direct compressed air against human skin. Make sure
air stream is directed away from user and other personnel in the area. To prevent injury, user must
wear protective goggles or face shield. Failure to follow this warning may result in injury to personnel.
1.
Remove all gasket material from mounting surfaces.
2.
Clean all parts and surfaces with solvent cleaning compound.
3.
Dry parts with compressed air.
0165 00-4
