8
TM 5-3805-290-23-2
RADIATOR REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
Maintenance Level
Personnel Required
Direct Support
MOS 62B, Construction Equipment Repairer (2)
Tools and Special Tools
References
Tool kit, general mechanic's (Item 96, WP 0205 00)
TM 5-3805-290-10
Shop equipment, automotive maintenance and
repair: field maintenance, basic, less power (Item
Equipment Conditions
75, WP 0205 00)
Bracket, link (Item 13, WP 0205 00) (2)
Hood removed (WP 0110 00)
Lifting equipment, 150-lb capacity
Cooling system drained (WP 0042 00)
Materials/Parts
Drawings Required
Cap set, protective (Item 8, WP 0206 00)
TM 5-3805-290-23P, Figure 32
Cleaning compound, solvent, type III (Item 9, WP
Estimated Time to Complete Task
Rag, wiping (Item 41, WP 0206 00)
Tag, marker (Item 54, WP 0206 00)
4.0 hr
WARN I N G
DO NOT service cooling system unless engine has been allowed to cool down. This is a pressurized cool-
ing system and escaping steam or hot coolant may result in serious burns.
DO NOT remove cooling system radiator cap when engine is hot. Allow engine to cool down. Loosen cap
to first stop and let any pressure out of cooling system, then remove cap. Failure to follow this warning
may result in serious burns.
Wear effective eye, hand, and skin protection when handling coolants. Failure to do so may result in
injury to personnel.
CAU T I ON
Wipe area clean around all hose connections to be opened during removal. Cap lines and hoses and
plug openings after removing. Contamination of system could result in premature failure.