TM 5-3805-290-23-2
SEPARATE LOADER FRAME AND REAR FRAME
(ARTICULATION PIVOT PINS REPLACEMENT) - CONTINUED
0183 00
SEPARATION - CONTINUED
6.
Disconnect wiring harness (11) from reservoir (12).
427-B0446
7.
Disconnect wiring harness connectors (13 and 14)
from main control valve (15).
427-B0447
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting equipment used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting equipment. Failure to follow this warning may result in injury or death
to personnel.
DO NOT disconnect or remove any hydraulic system line or fitting unless engine is shut down and hydraulic
system pressure has been relieved. Tighten all connections before applying pressure. Escaping hydraulic fluid
under pressure can penetrate the skin, causing injury to personnel.
At operating temperature, hydraulic oil is hot. Allow hydraulic oil to cool before disconnecting any hydraulic
lines. Failure to follow this warning may result in injury to personnel.
To prevent injury to personnel, wear protective eye covering and gloves.
0183 00-4