TM 5-3805-290-23-2
REAR TILT LEVER AND LINK REPLACEMENT - CONTINUED
0200 00
TILT LEVER REMOVAL - CONTINUED
12.
Use hydraulic jack (5) and wood block to support rear
link assembly (4). Remove pin assembly (25) from
rear lever assembly (2). Lower rear link assembly
from rear lever assembly.
427-B0642
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during
procedure. Ensure any lifting equipment used is in good condition and of suitable load capacity. Keep
clear of heavy parts supported only by lifting equipment. Failure to follow this warning may result in
injury or death to personnel.
N OT E
Rear lever assembly weighs 225 lb (102 kg).
Pin assembly weighs 90 lb (41 kg).
13.
With assistance, remove pin assembly (24) from arm
(26).
14.
Remove rear lever assembly (2) from arm (26).
427-B0643
0200 00-6