TM 5-3805-291-10
ENGINE AIR PRECLEANER SERVICE AND AIR CLEANER SERVICE - CONTINUED
0014 00
SERVICE - CONTINUED
N OT E
A light may be used to inspect for damage inside primary filter element.
8.
After cleaning, inspect primary filter element again for damaged pleats, tears, holes, gaskets, and seals. Discard primary
filter element if any damage is evident. Obtain replacement from Unit Maintenance.
N OT E
Secondary filter element must be replaced for every third primary filter element replacement.
9.
Uncover air inlet opening and install secondary filter element inside air cleaner housing.
N OT E
Primary filter element should be replaced after being cleaned a maximum of six times. If primary filter
element has been in service for 1 year, it should also be replaced.
10.
Install primary filter element in air cleaner housing.
11.
Ensure cover and dust ejector are clean. Clean as needed.
12.
Position cover on air cleaner housing with dust ejector facing down. Secure cover with three clamps.
13.
Run engine and check for proper operation (WP 0005 00). Ensure that engine air filter indicator does not come on (WP
14.
Lower hood (WP 0004 00).
END OF WORK PACKAGE
0014 00-3/(0014 00-4 Blank)
