TM 5-3805-291-23-1
TROUBLESHOOTING WITHOUT A DIAGNOSTIC CODE - CONTINUED
0008 00
Table 3. Transmission Troubleshooting - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1. Use a screw driver to verify that the
1. If screw driver does not indicate coil is
3.
High Stall Speed in One
solenoid is energized.
energized, make certain the solenoid
Gear or in One Direction.
being checked is the correct one
according to the Speed Range and
Direction conditions.
2. If correct solenoid is being checked, go
to Test 2.
2. Check for diagnostic codes (WP 0006
1. If there are no codes, the problem is in
00).
the electrical circuit. Troubleshoot the
circuit using the Electrical Schematic
or replace harness parts as needed (WP
00).
2. If a diagnostic code is present for each
appropriate tests from Troubleshooting
(a) 1401 03 for solenoid valve #1
(b) 1401 05 for solenoid valve #1
(c) 1401 06 for solenoid valve #1
(d) 1402 03 for solenoid valve #2
(e) 1402 05 for solenoid valve #2
(f) 1402 06 for solenoid valve #2
(g) 1403 03 for solenoid valve #3
(h) 1403 05 for solenoid valve #3
(i) 1403 06 for solenoid valve #3
(j) 1404 03 for solenoid valve #4
(k) 1404 05 for solenoid valve #4
(l) 1404 06 for solenoid valve #4
(m) 1405 03 for solenoid valve #5
(n) 1405 05 for solenoid valve #5
(o) 1405 06 for solenoid valve #5
3. If problem still exists, replace
transmission (WP 0204 00).
1. Check transmission oil passages and
1. Unblock passages or, if damaged,
4.
There is High Converter
oil cooler for restriction (WP 0205 00).
replace transmission oil cooler (WP
Pressure.
0205 00).
2. If problem still exists, go to Test 2.
2. Perform Transmission Pressure Test
If problem still exists, replace torque
converter (WP 0204 00).