TM 5-3805-291-23-1
TROUBLESHOOTING WITH A DIAGNOSTIC CODE - CONTINUED
0009 00
Table 3. Powertrain Control - Continued.
(MID 081)
CID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
0627 03
427-C1626
N OT E
The following test procedure may create other diagnostic codes. Ignore
these diagnostic codes and clear the diagnostic codes when the original
diagnostic code is corrected. Ensure diagnostic code CID 0627 FMI 03 is
active before performing this procedure.
1. Check switch operation.
(a) Disconnect wiring harness from
parking brake oil pressure switch (WP
0086 00).
(b) Connect one lead from a multimeter to
contact A of harness connector on
switch.
(c) Connect other lead from a multimeter
to contact B of harness connector of
switch.
(d) Measure resistance between contact A
and contact B. Note resistance.
(e) Disconnect multimeter lead from
contact B and connect lead to contact C.
(f) Measure resistance between contact A
1. If resistance from contact A to contact
and contact C.
B is greater than 5 Ohms, and resistance
from contact A to contact C is less than
5 Ohms, go to Test 2.
2. If resistance measurements do not
differ, the switch has failed. Replace
parking brake oil pressure switch (WP
0086 00).