TM 5-3805-291-23-1
TROUBLESHOOTING WITH A DIAGNOSTIC CODE - CONTINUED
0009 00
Table 3. Powertrain Control - Continued.
(MID 081)
CID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
(d) Use messenger to determine if CID
1. If CID 0627 FMI 03 is active, exit this
0627 03 - Continued.
0627 FMI 03 is present (TM 5-3805-
procedure and repeat procedure. If
291-10).
cause of diagnostic code is not found,
replace ECM.
2. If CID 0627 FMI 03 is not active,
diagnostic code does not exist at this
time. Resume normal machine
operation.
0627 04
427-C1626
N OT E
The following test procedure may create other diagnostic codes. Ignore
these diagnostic codes and clear the diagnostic codes when the original
diagnostic code is corrected. Ensure diagnostic code CID 0627 FMI 04 is
active before performing this procedure.
1. Check switch.
(a) Turn engine start and battery
disconnect switches to OFF position
(TM 5-3805-291-10).
(b) Disconnect wiring harness from
parking brake oil pressure switch (WP
0086 00).
1. If CID 0627 FMI 04 has been replaced
(c) Turn engine start and battery
by CID 0627 FMI 03, go to Test 3.
disconnect switches to ON position
(TM 5-3805-291-10).
2. If CID 0627 FMI 04 is still active, go to
Test 2.
2. Check wiring harness.
