TM 5-3805-291-23-1
TROUBLESHOOTING WITH A DIAGNOSTIC CODE - CONTINUED
0009 00
Table 3. Powertrain Control - Continued.
(MID 081)
CID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
0793 04
427-C1630
N OT E
The following test procedure may create other diagnostic codes. Ignore these diag-
nostic codes and clear these diagnostic codes when the original diagnostic code is
corrected. Ensure that the diagnostic code CID 0793 FMI 04 is active before per-
forming this procedure.
SeePrimary Steering Pressure Switch (Table 12) at the end of this work package.
1. Check switch.
(a) Turn engine start and battery
disconnect switches to OFF position
(TM 5-3805-291-10).
(b) Connect MSD (WP 0005 00).
(c) Disconnect wiring harness from
primary steering oil pressure switch
(WP 0088 00).
1. If CID 0793 FMI 04 has been replaced
(d) Turn engine start and battery
by CID 0793 FMI 03, go to Test 3.
disconnect switches to ON position
(TM 5-3805-291-10).
2. If CID 0793 FMI 04 is still active, go to
Test 2.
2. Check wiring harness.
(a) Turn battery disconnect and engine
start switches to OFF position (TM 5-
3805-291-10).
(b) Wiring harness remains disconnected
from switch.
(c) Disconnect wiring harness
connector(s) from powertrain ECM
(WP 0063 00).
