TM 5-3805-291-23-1
POWERTRAIN TESTS, INSPECTIONS, AND ADJUSTMENTS - CONTINUED
0014 00
TRANSMISSION PRESSURES TEST AND ADJUSTMENT
0014 00
Transmission Clutch Solenoid Modulating Valve Test
1.
Install test stands on six pressure taps (37 thru 42).
427-C0767
2.
Start and run engine at low idle (TM 5-3805-291-10).
N OT E
Make sure transmission oil is at normal operating temperature.
3.
Press transmission neutralizer override switch to disengage transmission neutralizer (TM 5-3805-291-10).
4.
With assistance, depress and hold right service brake pedal (TM 5-3805-291-10).
5.
With assistance, make sure machine is in FIRST SPEED. Disengage parking brake (TM 5-3805-291-10) and observe
pressure gages.
WAR N I N G
Injury or death can result fr m sudden machine movement.
o
Sudden movement of the machine can cause inury to persons on or near the machine.
j
Prevent possible injury to pers nnel by performing the procedure that follows before working on
o
the machine.
CAU T I ON
Care must be taken to ensure that fluids arecontained during inspection, maintenance, testing,
adjusting and repair. Be prepared to collect the fluid with suitable containers before opening any
compartment or disassembling any component containing fluids.
Do not connect or disconnect hosefittings to or from the quick disconnect nipples when there is
pressure in the system. This will prevent damage to the seals that are in the fitting.