TM 5-3805-291-23-1
STEERING SYSTEM TESTS, INSPECTIONS, AND ADJUSTMENTS - CONTINUED
0016 00
PISTON PUMP (STEERING) LOW PRESSURE STANDBY TEST AND ADJUSTMENT - CONTINUED
5.
With assistance, start and run engine at high idle and move tilt control lever to tilt control position (TM 5-3805-291-10).
6.
After oil has reached normal operating temperature, raise bucket slightly off ground (TM 5-3805-291-10).
7.
Continue to run engine at high idle.
N OT E
The reading should not exceed 525 psi (3,600 kPa).
If pressure is not correct, performPiston Pump (Steering) Margin Pressure Test and Adjustment in
this work package.
8.
Record pressure reading.
9.
Adjust flow compensator valve if pressure is not correct.
10.
With assistance, lower bucket and any attachment to ground and stop engine (TM 5-3805-291-10).
11.
Remove test stand from pressure tap (1).
0016 00
RELIEF VALVE (PUMP BACKUP) TEST AND ADJUSTMENT
1.
Connect steering frame lock (TM 5-3805-291-10).
2.
Engage parking brake (TM 5-3805-291-10).
3.
Place transmission in NEUTRAL (TM 5-3805-291-10).
4.
Attach test stand to pressure tap (1).
5.
With assistance, start and run engine at high idle (TM 5-3805-291-10).
6.
After oil has reached normal operating temperature, raise bucket slightly off ground (TM 5-3805-291-10).
7.
Stop engine (TM 5-3805-291-10).
0016 00-8
