TM 5-3805-291-23-1
HYDRAULIC SYSTEM TESTS, INSPECTIONS, AND ADJUSTMENTS - CONTINUED
0017 00
PILOT PRESSURE TO MAIN CONTROL VALVE CHECK - CONTINUED
7.
Install test stand on pilot oil pressure tap (22) of main control valve (21).
427-C0949
8.
Start and run engine at low idle (TM 5-3805-291-10).
9.
Warm hydraulic oil to 120 to 150F (49 to 65C) for accurate results (TM 5-3805-291-10).
10.
Raise work tool to full RAISE position (TM 5-3805-291-10).
0017 00-49
