TM 5-3805-291-23-1
HYDRAULIC SYSTEM TESTS, INSPECTIONS, AND ADJUSTMENTS - CONTINUED
0017 00
PILOT PRESSURE TO MAIN CONTROL VALVE CHECK - CONTINUED
N OT E
Pilot oil pressure should be at least 510 50 psi (3,515 345 kPa).
11.
Note pilot oil pressure reading.
12.
Position lift arms (19) on jack stands.
427-C0947
13.
If pilot oil pressure is within specification:
a.
Stop engine (TM 5-3805-291-10).
b.
Ensure control levers are in HOLD position (TM 5-3805-291-10).
c.
To relieve pressure in hydraulic tank (22), press and hold plunger on breaker relief valve (23).
427-C0935
0017 00-50