TM 5-3805-291-23-1
ELECTRICAL GENERAL MAINTENANCE INSTRUCTIONS - CONTINUED
0022 00
ELECTRICAL CONNECTOR INSPECTION (POWERTRAIN) - CONTINUED
8.
Check Fit of Contacts.
N OT E
This test is especially important for
intermittent problems.
a.
Use a new pin contact. Insert pin contact into
each socket contact, one at a time, in order to
check for a good grip on pin contact by socket
contact.
b.
Use a new socket contact. Insert pin contact into
each socket contact, one at a time, in order to
check for a good grip on pin contact by socket
contact. Pin contacts are located on mating side
of connector.
c.
Connector contact should stay connected when
connector is held in the position shown in illus-
tration. Connector contact is pin contact or
socket contact.
427-C2055
d.
Expected Result. Pin contacts and socket contacts appear to be OK.
(1)
If pin contacts and socket contacts appear to be OK, exit this procedure.
(2)
If a problem exists with connector terminal, replace connector contact.
0022 00-22
