TM 5-3805-291-23-1
ENGINE OIL COOLER CORE REPLACEMENT - CONTINUED
0027 00
REMOVAL
1.
Remove bolt (1) and washer (2) from engine oil cooler (3) and position bracket (4) aside.
2.
Remove four bolts (5) and washers (6) from filter base (7).
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting equipment used is in good condition and of suitable load capacity. Keep
clear of heavy parts supported only by lifting equipment. Failure to follow this warning may result in injury
or death to personnel.
N OT E
Engine oil cooler weighs 35 lb (16 kg).
3.
Remove three bolts (8) and spacers (9) from engine oil cooler (3).
4.
Remove seven bolts (10) and washers (11) from engine oil cooler (3).
5.
Remove engine oil cooler (3), two seals (12), and seals (13) from engine. Discard seals.
6.
Disconnect loose hose clamp (14) and hose (15) from cover (16).
7.
Remove cover (16) from machine.
8.
Remove dust cap (17), valve (18), O-ring (19), adapter (20), and O-ring (21) from cover (16). Discard O-rings.
9.
Remove plug (22) and O-ring (23) from cover (16). Discard O-ring.
427-C0104
0027 00-2
