TM 5-3805-291-23-1
ALTERNATOR REPLACEMENT - CONTINUED
0046 00
REMOVAL
N OT E
Tag wires prior to removal to ensure correct installation.
Wipe area clean around component before removal.
1.
Cut and discard tiedown strap (1) on cable assembly (2).
2.
Pull back cable cover (3).
3.
Remove cable nut (4) and lockwasher (5) from cable assembly (2). Discard lockwasher.
4.
Remove ground bolt (6), washer (7), lockwasher (8), and ground wire (9) from alternator (10). Discard lockwasher.
5.
Disconnect regulator wiring harness connector (11) from alternator (10).
6.
Remove four bolts (12), washers (13), and alternator (10) from machine.
427-C0067
7.
If replacing alternator (10), remove locknut (15),
washer (16), and alternator pulley (14) from alternator
(10).
8.
Set alternator pulley (14) aside for reuse.
427-C1593
0046 00-2
