TM 5-3805-291-23-2
TORQUE CONVERTER OUTPUT SPEED SENSOR REPLACEMENT - CONTINUED
0091 00
REMOVAL
1.
At top right of transmission, remove bolt (1), washer (2), and clip (3) from transmission flange (4).
2.
Remove bolt (5), washer (6), and clip (7) from transmission housing (8).
3.
Disconnect wiring harness (9) from torque converter output speed sensor (10).
4.
Remove torque converter output speed sensor (10) and seal (11) from transmission flange (4). Discard seal.
INSTALLATION
1.
Lubricate new seal (11) with a thin coat of clean oil. Install new seal on torque converter output speed sensor (10).
2.
Place torque converter output speed sensor (10) in transmission flange (4).
3.
Connect wiring harness (9) to torque converter output speed sensor (10).
4.
Install clip (7), washer (6), and bolt (5) on transmission housing (8).
5.
At top right of transmission, install clip (3), washer (2), and bolt (1) on transmission flange (4).
0091 00-2
