TM 5-3805-291-23-2
TILT KICKOUT POSITION SENSOR AND MOUNTING REPLACEMENT - CONTINUED
0089 00
INSTALLATION
1.
Position bracket (13) on machine.
2.
Install two spacers (12), washers (11), and bolts (12) on bracket (13).
3.
Install new tiedown strap (7) on tilt kickout position sensor (6).
4.
Position tilt kickout position sensor (6) on bracket (13).
5.
Install five bolts (8), washers (9), and clip (14) on tilt kickout position sensor (6).
6.
Install two washers (19), bolts (18), and plate assembly (22) on tilt kickout position sensor (6).
7.
Install sleeve (20) and bolt (21) on tilt arm (17).
8.
Install two washers (16), bolts (15), and tilt arm (17) on machine.
9.
Install spacer (12), clip (24), washer (5), and bolt (23) on bracket (13).
10.
Connect wiring harness (4) to tilt kickout position sensor (6).
0089 00-4
