TM 5-3805-291-23-2
TORQUE CONVERTER OIL TEMPERATURE SENSOR REPLACEMENT - CONTINUED
0090 00
REMOVAL
1.
At right side of machine, disconnect engine wiring
harness (1) from sensor (2).
2.
Remove oil temperature sensor (3) and O-ring (4)
from cooler tube (5). Discard O-ring.
INSTALLATION
1.
Apply a thin coat of clean oil to new O-ring (4). Install new O-ring on temperature sensor (3).
2.
Install oil temperature sensor (3) on cooler tube (5).
3.
Connect engine wiring harness (1) to sensor (2).
4.
Fill transmission with oil (WP 0100 00).
5.
Run engine until normal operating temperature is reached (TM 5-3805-291-10).
6.
Shut down engine (TM 5-3805-291-10).
7.
Check for leaks.
END OF WORK PACKAGE
0090 00-2
