TM 5-3805-291-23-2
SECONDARY STEERING PUMP AND ELECTRIC MOTOR MAINTENANCE - CONTINUED
0123 00
INSTALLATION
1.
Position electric motor (4) and secondary steering
pump (6) on machine and install two washers (9) and
bolts (8).
2.
Lubricate two new O-rings (7) with thin coat of clean
hydraulic oil and install in hose assemblies (5). Con-
nect hose assemblies to secondary steering pump (6).
3.
Connect cable assemblies and wiring harness (3) to
electric motor (4) and install two washers (2) and nuts
(1). Tighten nuts to 15 lb-ft (20 Nm).
4.
Install left side panel (WP 0133 00).
5.
Install left side ladder (WP 0134 00).
6.
Fill hydraulic tank (WP 0148 00).
7.
Run engine and verify correct operation of secondary steering pump and electric motor (TM 5-3805-291-10).
END OF WORK PACKAGE
0123 00-4