TM 5-3805-291-23-2
STEERING HOSES, LINES, AND FITTINGS REPLACEMENT - CONTINUED
0124 00
N OT E
Tag hoses prior to removal to ensure correct installation.
Use a container to catch any fluid that may drain from hoses or system. Dispose of fluid IAW local pol-
icy and ordinances. Ensure all spills are cleaned up.
REMOVAL
1.
Disconnect five hoses (1 thru 5) and associated fittings from steering metering pump (WP 0128 00).
2.
Remove bolt (6) and washer (7) from clip (8).
3.
Remove bolt (9) and washer (10) from clip (11). Remove clip from machine.
4.
Disconnect hose (1) from elbow (12) and remove hose from machine.
5.
Remove O-ring (13) from hose (1). Discard O-ring.
6.
Disconnect hose (2) from bracket (14) and remove hose from machine.
7.
Remove O-ring (15) from hose (2). Discard O-ring.
8.
Disconnect hose (3) from elbow (16) and remove hose and clip (8) from machine.
9.
Remove O-ring (17) from hose (3). Discard O-ring.
10.
Disconnect hose (4) from elbow (18) and remove hose from machine.
11.
Remove O-ring (19) from hose (4). Discard O-ring.
12.
Disconnect hose (5) from elbow (20) and remove hose from machine.
13.
Remove O-ring (21) from hose (5). Discard O-ring.
14.
Remove elbows (12, 14, 16, 18, and 20) from machine.
15.
Remove five O-rings (22 thru 26) from elbows (12, 14, 16, 18, and 20). Discard O-rings.
0124 00-2