4
TM 5-3805-291-23-2
BROOM MOTOR REPLACEMENT
0165 00
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Maintenance Level
Personnel Required
MOS 62B, Construction Equipment Repairer
Unit
Equipment Conditions
Tools and Special Tools
Machine parked on level ground (TM 5-3805-291-
Tool kit, general mechanic's, automotive (Item 90,
10)
Work tool lowered to ground (TM 5-3805-291-10)
Shop equipment, automotive maintenance and
Wheels chocked
repair: organizational maintenance, common no.
1 (Item 70, WP 0232 00)
Parking brake engaged (TM 5-3805-291-10)
Materials/Parts
Broom assembly removed (TM 5-3805-291-10)
Cap set, protective (Item 6, WP 0233 00)
Drawings Required
Rag, wiping (Item 35, WP 0233 00)
TM 5-3805-291-23P, Figure 169
Tag, marker (Item 43, WP 0233 00)
Estimated Time to Complete Task
O-ring (4)
1.0 hr
REMOVAL
WARN I N G
DO NOT disconnect or remove any hydraulic system line or fitting unless engine is shut down and
hydraulic system pressure has been relieved. Tighten all connections before applying pressure. Escap-
ing hydraulic fluid under pressure can penetrate skin, causing injury to personnel.
At operating temperature, hydraulic oil is hot. Allow hydraulic oil to cool before disconnecting any
hydraulic lines. Failure to follow this warning may result in injury to personnel.
C AU T I O N
Wipe area clean around all connections to be opened during removal. Cap lines and hoses and plug open-
ings after removing lines. Contamination of system could result in premature failure.
