TM 5-3805-291-23-2
BROOM MOTOR REPLACEMENT - CONTINUED
0165 00
REMOVAL - CONTINUED
4.
Remove four bolts (10) and washers (11) from
motor (5).
5.
Remove motor (5) from bracket (12).
427-C1535
INSTALLATION
N OT E
Apply a thin coat of clean oil to all O-rings before installation.
1.
Install motor (5) on bracket (12).
2.
Install four washers (11) and bolts (10) on motor (5).
3.
Install carrier (8), washer (7), and bolt (6) on motor shaft (9).
4.
Install two new O-rings (4) in fittings (3) and install fittings on motor (5).
5.
Install two new O-rings (2) in hydraulic hoses (1) and connect two hydraulic hoses to fittings (3).
6.
Operate machine and verify correct operation of broom motor (TM 5-3805-291-10).
7.
Shut down engine (TM 5-3805-291-10).
8.
Check for leaks.
END OF WORK PACKAGE
0165 00-3/(0165 00-4 Blank)
