TM 5-3805-291-23-2
BROOM MOTOR REPLACEMENT - CONTINUED
REMOVAL - CONTINUED
N OT E
Tag hoses prior to removal to ensure correct installation.
Use a container to catch any fluid that may drain from hoses or system. Dispose of fluid IAW local pol-
icy and ordinances. Ensure all spills are cleaned up.
1.
Disconnect two hydraulic hoses (1) and remove
O-rings (2) from fittings (3). Discard O-rings.
2.
Remove two fittings (3) and O-rings (4) from motor
(5). Discard O-rings.
427-C1533
3.
Remove bolt (6), washer (7), and carrier (8) from
motor shaft (9).
427-C1534
0165 00-2