TM 5-3805-291-23-2
CYLINDER HEAD REPLACEMENT - CONTINUED
0172 00
REMOVAL
C AU T I O N
Wipe area clean around all connections to be opened during removal. Cap lines and hoses and plug
openings after removing lines. Contamination of system could result in premature failure.
N OT E
Tag hoses and wiring harnesses prior to removal to ensure correct installation.
Use a container to catch any fluid that may drain from hoses or system. Dispose of fluid IAW local policy
and ordinances. Ensure all spills are cleaned up.
Remove and discard all associated tiedown straps.
1.
Disconnect two hoses (1) and remove O-rings (2) from fittings (3). Discard O-rings.
2.
Disconnect wiring harnesses (4 and 5) from sensors (6 and 7).
3.
Remove nut (8), washer (9), and bracket (10) from cylinder head (11).
4.
Remove bolt (12), washer (13), and clip (14) from cylinder head (11).
5.
Remove three bolts (15), washer (16), and two brackets (17) from cylinder head (11).
427-C1905
0172 00-2
