TM 5-3805-291-23-2
CYLINDER HEAD REPLACEMENT - CONTINUED
0172 00
REMOVAL - CONTINUED
6.
Remove bolt (18), washer (19), two clips (20), and
spacer (21) from cylinder head (11).
7.
Remove ether start aid (22) from cylinder head (11).
8.
With assistance, remove three bolts (23) and washers
(24) from bracket (25).
9.
Position bracket (25) with fuel filter bases (26) aside.
427-C1906
10.
Loosen two clamps (27) from hoses (28) and remove
hoses from fittings (29).
11.
Remove two fittings (29) from cylinder head (11).
12.
Remove two O-rings (30) from fittings (29). Discard
O-rings.
13.
Disconnect sensor (31) from wiring harness (32).
14.
Remove two bolts (33), washers (34), and brackets
(35) from cylinder head (11).
427-C1907
0172 00-3
