TM 5-3805-291-23-2
ROCKER ARMS AND PUSH RODS MAINTENANCE - CONTINUED
0180 00
ASSEMBLY
1.
If removed, use bushing driver to install six bearings (8) in rocker arms (7).
N OT E
Inner stands have offset holes.
2.
Install two inner stands (5) and six rocker arms (7) on rocker arm shaft (2).
3.
Install two outer stands (6) on rocker arm shaft (2).
INSTALLATION
1.
Place four pushrods (3) and rocker arm shaft (2) in
position on cylinder head (4).
2.
Install four bolts (1) on rocker arm shaft (2).
3.
Tighten locknuts to 40 7 lb-ft (55 10 Nm).
4.
Adjust fuel injector lash (WP 0187 00).
5.
Adjust intake and exhaust valve lash (WP 0179 00).
427-C0900
6.
Install valve cover (WP 0024 00).
7.
Run engine until normal operating temperature is reached (TM 5-3805-291-10).
Shut down engine (TM 5-3805-291-10).
8.
9.
Check for leaks.
END OF WORK PACKAGE
0180 00-3/(0180 00-4 Blank)
