4
TM 5-3805-291-23-2
TRANSMISSION OIL COOLER REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
Maintenance Level
Materials/Parts - Continued
Direct Support
Tag, marker (Item 43, WP 0233 00)
Tools and Special Tools
O-ring (2)
Tool kit, general mechanic's, automotive (Item 90,
Personnel Required
MOS 62B, Construction Equipment Repairer (2)
Shop equipment, automotive maintenance and
repair: field maintenance, basic, less power (Item
References
68, WP 0232 00)
TM 5-3805-291-10
Lifting equipment, 100-lb capacity
Materials/Parts
Equipment Conditions
Cleaning compound, solvent, type III (Item 7, WP
Side covers removed (WP 0135 00)
Air cleaner removed (WP 0030 00)
Oil, lubricating, OE/HDO-40 (Item 26, WP 0233
00)
Turbocharger removed (WP 0031 00)
Oil, lubricating, OEA-30, Arctic (Item 29, WP
Engine oil cooler removed (WP 0027 00)
Drawings Required
Oil, lubricating, refrigerant compressor: Synthetic
Ester (Item 30, WP 0233 00)
TM 5-3805-291-23P, Figure 89
Rag, wiping (Item 35, WP 0233 00)
Estimated Time to Complete Task
Spill containment unit, hazardous material (Item
41, WP 0233 00)
7.5 hr
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting equipment used is in good condition and of suitable load capacity. Keep
clear of heavy parts supported only by lifting equipment. Failure to follow this warning may result in injury
or death to personnel.
C AU T I O N
Wipe area clean around all connections to be opened during removal. Cap lines and hoses and plug
openings after removing lines. Contamination of system could result in premature failure.