TM 5-3805-291-23-2
TRANSMISSION OIL PUMP (GEAR PUMP) REPLACEMENT - CONTINUED
0206 00
REMOVAL
C AU T I O N
Wipe area clean around all connections to be opened during removal. Cap lines and hoses and plug open-
ings after removing lines. Contamination of system could result in premature failure.
N OT E
Tag hoses and wires prior to removal to ensure correct installation.
Use a container to catch any fluid that may drain from hoses or system. Dispose of fluid IAW local pol-
icy and ordinances. Ensure all spills are cleaned up.
1.
Remove bolt (1), washer (2), and clip (3) from bracket
(4).
2.
Position wiring harness (5) aside.
427-C1000
3.
Remove four bolts (6), washers (7), two flange halves
(8), and disconnect hose assembly (9).
4.
Remove and discard O-ring (10).
5.
Remove two bolts (11) and disconnect tube assembly
(12).
6.
Remove and discard O-ring (13).
7.
Remove bolt (14), washer (15), and disconnect sensor
(16).
8.
Remove bolt (17) and bracket (18).
427-C1967
0206 00-2
